72225LB15PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72225LB15PFGI8 Overview
This package is included in TQFP .A Surface Mount mounting method is recommended.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 64 terminations can be found in FIFO means.Operation pins are 64 .There is a maximum current requirement of 60mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.85°C °C is the memory logic's maximum operating temperature that allows stable operation.It is contained within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.The FIFO memory IC is equipped with a total of 64 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .It is normal for a component to be equipped with 5V power supplies.
72225LB15PFGI8 Features
FIFOs category
Frequency at most
72225LB15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB15PFGI8 FIFOs Memory applications.
- Industrial Systems
- Test Equipment
- Seismic Data Collection at Extreme Temperatures
- Code converters
- General Data Collection Applications at Low-Temperatures
- Product traceability
- Laser Receiver System
- Battery Charger
- MP3 Interface for Automobile
- Consumer Systems
