72225LB15TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB15TF Overview
You can find FIFO memory chip in package TQFP .The recommended mounting way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A supply voltage of 5V is recommended for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.This FIFO memory IC is equipped with 64 pins in total.It is capable of maintaining good accuracy with a frequency of 66.7MHz .There is 66.7MHz FIFO memory IC's maximum value for regular operation.In normal circumstances, the component has 5V power supplies.
72225LB15TF Features
FIFOs category
Frequency at most
72225LB15TF Applications
There are a lot of Integrated Device Technology (IDT) 72225LB15TF FIFOs Memory applications.
- Test Equipment
- Communications
- Address mapping
- Portable Information Devices
- SPI Bus Flash Memory Device
- Data
- Game Consoles
- Laser Receiver System
- Buses
- Look-up Tables
