72225LB15TFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB15TFI Overview
FIFO memory chip is contained in the LQFP package.Memory IC's recommended mounted way is Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.64 terminations are contained in FIFO means.There are 64 pins for operation.For its operation, 60mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.It is contained within FIFOs .It has a OTHER FIFO memory type IC.FIFO may operate at a very low supply voltage, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.Approximately 64 pins are attached to it.When the frequency is set to 66.7MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .Components normally possess 5V power supplies.
72225LB15TFI Features
FIFOs category
Frequency at most
72225LB15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72225LB15TFI FIFOs Memory applications.
- Address mapping
- Character generators
- Queues for communication systems
- Cardiac Monitoring Device
- Microprogramming
- One assembly
- Analog-to-digital converters
- Battery Charger
- IP Camera Buffer
- Communications
