72225LB15TFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB15TFI8 Overview
The LQFP package contains FIFO memory chip.The package comes in a case of Tape & Reel .It is pointing in the direction of Surface Mount .Supply voltages of 5V are capable of achieving high efficiency.The number of terminations in FIFO means is 64 .64 pins are used for operation.FIFO design requires a maximum current of 60mA to operate.A voltage of 5V should be used for FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.As a result of having a maximum operating temperature of 85°C degrees Celsius, the unit is capable of exhibiting stable operation.A self-contained gadget is contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.There are a total of 64 pins on this FIFO memory IC.With a frequency of 66.7MHz , it exhibits good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.There are normally 5V power supplies attached to the component.
72225LB15TFI8 Features
FIFOs category
Frequency at most
72225LB15TFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB15TFI8 FIFOs Memory applications.
- IP Camera Buffer
- Magnetic memories
- High-speed disk
- TVs
- HDD
- Temporary storage elements
- Firmware loaders
- Thermal Management for DDR3 Memory Modules
- Telecommunication
- High-speed graphics pixel buffer
