72225LB25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| Part Status | Active |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Frequency | 40MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Direction | Unidirectional |
| Density | 18 kb |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25J Overview
FIFO memory chip is included in the PLCC package.Mounting it in Surface Mount is recommended.FIFO design has 68 operation pins.In order for FIFO design to operate, a maximum current of 60mA is required.A voltage of 5V should be used for FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.When the frequency is set to 40MHz , the system can maintain good accuracy.Normally, the FIFO memory's maximum value is 40MHz .
72225LB25J Features
Frequency at most
72225LB25J Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25J FIFOs Memory applications.
- Computers
- Consumer Systems
- Microprogramming
- Computer Systems
- Portable Information Devices
- Down-Hole Energy Drilling
- PC peripheral
- Alarm System
- Rate buffers
- Multimedia
