72225LB25J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25J8 Overview
This package is included in PLCC .Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V there is the possibility of high efficiency.In FIFO means, there are 68 terminations.The operation pins are 68 pins.In order to operate FIFO design, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.It is contained within FIFOs .It has a type OTHER FIFO memory IC.Low supply voltages, such as 4.5V V, may be required for operation.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 68 pins on this FIFO memory IC.With a frequency of 40MHz , it maintains good accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .Normally, 5V power supplies are owned by the component.
72225LB25J8 Features
FIFOs category
Frequency at most
72225LB25J8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25J8 FIFOs Memory applications.
- Event Recorder
- Cameras
- Signal processing
- Buses
- Video Processing
- Temporary storage elements
- Test Equipment
- Product traceability
- SPI Bus Flash Memory Device
- Consumer Systems
