72225LB25JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25JI Overview
FIFO memory chip can be found in the PLCC package.It is recommended that memory IC be mounted in the Surface Mount direction.With a supply voltage of 5V volts, high efficiency is possible.FIFO consists of 68 terminations, which indicates that FIFO means is empty.68 pins are the operation pins.Its maximum operating current is 60mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.A total of 68 pins are present on the FIFO memory IC.With a frequency of 40MHz , it exhibits good accuracy.40MHz is the FIFO memory IC's maximum value for regular operation.In normal circumstances, the component has 5V power supplies.
72225LB25JI Features
FIFOs category
Frequency at most
72225LB25JI Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25JI FIFOs Memory applications.
- Firmware loaders
- Consumer Systems
- Buses
- Test Equipment
- Cardiac Monitoring Device
- Application that requires re-writable nonvolatile parameter memory
- Data communications
- PC peripheral
- Network bridges
- High-speed disk
