72225LB25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25JI8 Overview
FIFO memory chip is included in the PLCC package.It comes in a Tape & Reel package.A Surface Mount mounting method is recommended.With a supply voltage of 5V volts, high efficiency is possible.The number of terminations in FIFO means is 68 .68 pins are used for operation.FIFO design requires a maximum current of 60mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.It is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 4.5V V.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 68 pins on this board.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .It is normal for the component to own 5V power supplies.
72225LB25JI8 Features
FIFOs category
Frequency at most
72225LB25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25JI8 FIFOs Memory applications.
- Wireless
- Programmable Logic Controller
- Address mapping
- Computer networks
- Video time base correction
- Medical Monitoring Device
- A/D output buffers
- General Data Collection Applications at Extreme High-Temperatures
- Communications Systems
- Cameras
