72225LB25PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25PF8 Overview
The TQFP package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.A total of 64 terminations are contained within FIFO means.These are the 64 pins for operation.There is a maximum current requirement of 60mA for its operation.A 5V supply voltage will ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Low supply voltages, such as 4.5V V, may be required for operation.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Currently, it has 64 pins.A frequency of 40MHz is capable of maintaining good accuracy.Normally, the FIFO memory's maximum value is 40MHz .Components normally possess 5V power supplies.
72225LB25PF8 Features
FIFOs category
Frequency at most
72225LB25PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25PF8 FIFOs Memory applications.
- Analog-to-digital converters
- Multimedia
- Laser Receiver System
- Microprogramming
- One assembly
- Optical memories
- High-speed graphics pixel buffer
- Disk Controllers
- Networking
- Data
