72225LB25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25PFI Overview
TQFP is a package that contains FIFO memory chip.A Surface Mount mounting method is recommended.When the supply voltage is 5V there is the possibility of high efficiency.FIFO consists of 64 terminations, which indicates that FIFO means is empty.These are the 64 pins for operation.FIFO design requires 60mA amps of current to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.This gadget is self-contained in?FIFOs .The IC of the part is of the type OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 64 pins are attached to it.In the presence of a 40MHz frequency, it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .Normally, 5V power supplies are owned by the component.
72225LB25PFI Features
FIFOs category
Frequency at most
72225LB25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25PFI FIFOs Memory applications.
- Networking
- General Data Collection Applications at Low-Temperatures
- Product traceability
- Consumer
- Smart Meter
- Multi-stage synchronizer
- Network bridges
- Portable Information Devices
- Seismic Data Collection at Extreme Temperatures
- IP Camera Buffer
