72225LB25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| Part Status | Active |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 40MHz |
| Operating Supply Voltage | 5V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Density | 18 kb |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25PFI8 Overview
FIFO memory chip is contained in the TQFP package.Surface Mount is recommended as the mounting method.These are the 64 pins for operation.In order to operate it, it requires 60mA volts of current.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.Despite a frequency of 40MHz , it is capable of maintaining good accuracy.It is recommended that the FIFO memory's maximum value be set to 40MHz .
72225LB25PFI8 Features
Frequency at most
72225LB25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25PFI8 FIFOs Memory applications.
- Medical Monitoring Device
- Battery Charger
- SPD for DDR3 Memory Modules
- Game Consoles
- IP Camera Buffer
- Down-Hole Energy Drilling
- SPI Bus Flash Memory Device
- Computer Systems
- Alarm System
- Rate buffers
