72225LB25TF
| Parameters | |
|---|---|
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
72225LB25TF Overview
FIFO memory chip is contained in the TQFP package.It is pointing in the direction of Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 64 terminations.Operation pins are 64 .The maximum current required for its operation is 60mA .FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .It has a type OTHER FIFO memory IC.Low supply voltages, such as 4.5V V, may be required for operation.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It consists of a total of 64 pins.With a frequency of 40MHz , it maintains good accuracy.Regular operation has a FIFO memory's maximum value of 40MHz .It is normal for the component to own 5V power supplies.
72225LB25TF Features
FIFOs category
Frequency at most
72225LB25TF Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25TF FIFOs Memory applications.
- Firmware loaders
- Computer networks
- Character generators
- Application that requires re-writable nonvolatile parameter memory
- Seismic Data Collection at Extreme Temperatures
- Event Recorder
- SPI Bus Flash Memory Devices
- Data communications
- A/D output buffers
- Video time base correction
