72225LB25TF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72225LB25TF8 Overview
You can find FIFO memory chip in package TQFP .It is pointing in the direction of Surface Mount .When the supply voltage is 5V there is the possibility of high efficiency.FIFO means contains a total of 64 terminations.64 pin is used for operation.FIFO design requires 60mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.Its maximum operating temperature of 70°C °C ensures stable operation.There is a self-contained gadget within FIFOs .This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 40MHz it can maintain good accuracy.During regular operation, 40MHz is the FIFO memory's maximum value.A component normally has 5V power supplies attached to it.
72225LB25TF8 Features
FIFOs category
Frequency at most
72225LB25TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25TF8 FIFOs Memory applications.
- Consumer Systems
- Multi-stage synchronizer
- Magnetic memories
- Down-Hole Energy Drilling
- Thermal Management for DDR3 Memory Modules
- GPS Offender Tracking
- Data communications
- Portable Information Devices
- HDD
- Controlled baseline
