72225LB25TFI
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
72225LB25TFI Overview
You can find FIFO memory chip in the LQFP package.Mounting it Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.FIFO design requires 60mA amps of current to operate.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 85°C °C.In FIFOs , there is a self-contained gadget.It has a OTHER FIFO memory type IC.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.The FIFO memory IC has a total of 64 pins.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.There are normally 5V power supplies attached to the component.
72225LB25TFI Features
FIFOs category
Frequency at most
72225LB25TFI Applications
There are a lot of Integrated Device Technology (IDT) 72225LB25TFI FIFOs Memory applications.
- Desktop Computers
- General Data Collection Applications at Low-Temperatures
- Smart Meter
- Extended product life cycle
- TVs
- A/D output buffers
- Network switching/routing
- Data
- Networking
- Address mapping
