72230L10TPG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX8 |
| Standby Current-Max | 0.005A |
| Memory Density | 16384 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72230L10TPG Overview
DIP is a package that contains FIFO memory chip.Through Hole is recommended as the mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .As a result of this, FIFO means contains 28 terminations.28 pin is used for operation.FIFO requires a minimum of 40mA current to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 28 pins on this FIFO memory IC.It is recommended that the FIFO memory's maximum value be set to 100MHz .It is normal for a component to be equipped with 5V power supplies.
72230L10TPG Features
FIFOs category
Frequency at most
72230L10TPG Applications
There are a lot of Integrated Device Technology (IDT) 72230L10TPG FIFOs Memory applications.
- Desktop Computers
- Rate buffers
- Game Controller
- Game Consoles
- Extended product life cycle
- Routers
- One assembly
- Analog-to-digital converters
- Transistors
- Extended product-change notification
