Parameters |
Cycle Time |
10 ns |
Height Seated (Max) |
3.556mm |
Length |
13.97mm |
Width |
11.43mm |
Thickness |
2.79mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
32 |
Published |
2005 |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Frequency |
100MHz |
Pin Count |
32 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
COMMERCIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
35mA |
Max Supply Current |
35mA |
Frequency (Max) |
100MHz |
Access Time |
6.5 ns |
Organization |
2KX9 |
Density |
18 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
9b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
72231L10J Overview
You can find FIFO memory chip in package PLCC .Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V allows for high efficiency.32 terminations are contained in FIFO means.FIFO design has 32 operation pins.In order for FIFO design to operate, a maximum current of 35mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 5V .FIFO operates at a minimum temperature of 0°C degrees Celsius to ensure reliabilFIFOy.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Currently, it has 32 pins.It is capable of maintaining good accuracy with a frequency of 100MHz .For regular operation, the memory logic's maximum value is 100MHz .Normaly, the component is powered by 5V power supplies.
72231L10J Features
FIFOs category
Frequency at most
72231L10J Applications
There are a lot of Integrated Device Technology (IDT) 72231L10J FIFOs Memory applications.
- One assembly
- SPI Bus Flash Memory Device
- TVs
- Alarm System
- Seismic Data Collection at Extreme Temperatures
- Routers
- IP Radio
- Video Processing
- Battery Charger
- MP3 Interface for Automobile