72231L10JG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 9b |
| Direction | Bidirectional |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Height Seated (Max) | 3.5mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72231L10JG Overview
PLCC is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.An input voltage of 5V results in high efficiency.FIFO means contains 32 terminations.32 pins are used for operation.FIFO design requires 35mA amps of current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , this gadget is self-contained.It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.It is capable of maintaining good accuracy with a frequency of 100MHz .There is 100MHz FIFO memory IC's maximum value for regular operation.Components normally possess 5V power supplies.FIFO memory chip offers enhanced flexibility due to its use of 1 circuits.
72231L10JG Features
FIFOs category
Frequency at most
72231L10JG Applications
There are a lot of Integrated Device Technology (IDT) 72231L10JG FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- Tape controllers
- Temporary storage elements
- Portable Information Devices
- Signal processing
- Medical Monitoring Device
- Down-Hole Energy Drilling
- Telecommunication
- Multi-stage synchronizer
- High-speed graphics pixel buffer
