72231L10PF
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
72231L10PF Overview
You can find FIFO memory chip in the TQFP package.Mounting it Surface Mount is recommended.High efficiency is possible with a supply voltage of 5V .In FIFO means, there are 32 terminations.As far as the operation pins are concerned, they are 32 pins.FIFO design requires a maximum current of 35mA to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.The gadget is self-contained and can be found in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.With a frequency of 100MHz , it maintains good accuracy.There is 100MHz FIFO memory IC's maximum value for regular operation.In normal circumstances, the component has 5V power supplies.
72231L10PF Features
FIFOs category
Frequency at most
72231L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72231L10PF FIFOs Memory applications.
- Buses
- SPI Bus Flash Memory Device
- Down-Hole Energy Drilling
- GPS Offender Tracking
- Smart Meter
- IP Radio
- Controlled baseline
- Address mapping
- Communications
- One assembly
