72231L15J8
| Parameters | |
|---|---|
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
72231L15J8 Overview
The PLCC package contains FIFO memory chip.Mounting it in Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.The number of terminations in FIFO means is 32 .In the case of the operation pins, they are 32 pins.FIFO design requires 35mA amps of current to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained within FIFOs .In this part, the memory type is OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.An input voltage of 5.5V V is the maximum that FIFO memory can handle.The FIFO memory IC has a total of 32 pins.A frequency of 66.7MHz is capable of maintaining good accuracy.66.7MHz is the FIFO memory IC's maximum value for regular operation.Normaly, the component is powered by 5V power supplies.
72231L15J8 Features
FIFOs category
Frequency at most
72231L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72231L15J8 FIFOs Memory applications.
- Test site
- Address mapping
- Buses
- Switches
- Event Recorder
- Queues for communication systems
- Extended product-change notification
- Product traceability
- Telecommunication
- Computer Systems
