72231L15JI
| Parameters | |
|---|---|
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
72231L15JI Overview
You can find FIFO memory chip in package PLCC .Surface Mount is memory IC's recommended mounting method.Supply voltages of 5V are capable of achieving high efficiency.I found that it has 32 terminations in FIFO means.32 pin is used for operation.FIFO design requires a maximum current of 35mA to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.Its maximum operating temperature of 85°C °C ensures stable operation.FIFOs contains this gadget in its entirety.A OTHER FIFO type memory IC is present in the FIFO memory chip.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 32 pins on this FIFO memory IC.It maintains good accuracy at a 66.7MHz frequency.Normally, the FIFO memory's maximum value is 66.7MHz .There are normally 5V power supplies attached to the component.
72231L15JI Features
FIFOs category
Frequency at most
72231L15JI Applications
There are a lot of Integrated Device Technology (IDT) 72231L15JI FIFOs Memory applications.
- Portable Information Devices
- Wireless
- Queues for communication systems
- Controlled baseline
- Firmware loaders
- One assembly
- Game Controller
- Rate buffers
- Programmable Logic Controller
- PC peripheral
