72231L15PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72231L15PF8 Overview
You can find FIFO memory chip in the TQFP package.It's packaged in the shape of a Tape & Reel .A Surface Mount mounting method is recommended.When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 32 terminations.Operation pins are 32 .FIFO requires a minimum of 35mA current to operate.In order to maximize efficiency, the supply voltage should be set to 5V .For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO may operate at a very low supply voltage, such as 4.5V V.FIFO memory can handle a maximum supply voltage of 5.5V V.It has a total of 32 pins on it.In the presence of a 66.7MHz frequency, it can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.It is normal for a component to be equipped with 5V power supplies.
72231L15PF8 Features
FIFOs category
Frequency at most
72231L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72231L15PF8 FIFOs Memory applications.
- GPS Offender Tracking
- SPI Bus Flash Memory Device
- Medical Monitoring Device
- Microprogramming
- Consumer
- IP Camera Buffer
- Laser Receiver System
- Tape controllers
- Desktop Computers
- Computers
