72231L15PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72231L15PFGI8 Overview
TQFP is the package in which FIFO memory chip is contained.In this case, it is packaged in case number Tape & Reel .The recommended mounting way is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.In the case of the operation pins, they are 32 pins.For its operation, 35mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.The memory logic's maximum operating temperature is 85°C °C, which allows for stable operation.Low supply voltages, such as 4.5V V, may be required for operation.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.Approximately 32 pins are attached to it.It is capable of maintaining good accuracy with a frequency of 66.7MHz .During normal operation, the FIFO memory's maximum value is 66.7MHz .
72231L15PFGI8 Features
Frequency at most
72231L15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72231L15PFGI8 FIFOs Memory applications.
- Signal processing
- Network bridges
- Communications Systems
- Character generators
- Thermal Management for DDR3 Memory Modules
- Computer Systems
- Product traceability
- Alarm System
- High-speed disk
- Down-Hole Energy Drilling
