72231L15PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72231L15PFI Overview
The TQFP package contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V there is the possibility of high efficiency.A total of 32 terminations are contained within FIFO means.These are the 32 pins for operation.FIFO design requires a maximum current of 35mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.An operating temperature of 85°C °C is necessary for stable operation.In FIFOs , there is a self-contained gadget.The IC of the part is of the type OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 32 pins on this board.With a frequency of 66.7MHz , it exhibits good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.In normal circumstances, the component has 5V power supplies.
72231L15PFI Features
FIFOs category
Frequency at most
72231L15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72231L15PFI FIFOs Memory applications.
- Data-acquisition systems
- IP Radio
- Extended product life cycle
- Code converters
- Game Consoles
- Measurement Equipment
- Cardiac Monitoring Device
- Video Processing
- Telecommunication
- Look-up Tables
