72231L25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72231L25JI8 Overview
You will find FIFO memory chip in the PLCC package.It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.FIFO means contains a total of 32 terminations.Operation pins are 32 .FIFO design requires a maximum current of 35mA to operate.A 5V supply voltage will ensure FIFO's maximum efficiency.It operates at -40°C degrees Celsius to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.It is self-contained in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.Approximately 32 pins are attached to it.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.A FIFO memory's maximum value of 40MHz can be used for regular operation.Normally, the component owns 5V power supplies.
72231L25JI8 Features
FIFOs category
Frequency at most
72231L25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72231L25JI8 FIFOs Memory applications.
- One assembly
- Fabrication Site
- Tape controllers
- A/D output buffers
- GPS Offender Tracking
- Communications
- Cardiac Monitoring Device
- Computers
- Look-up Tables
- Data
