72231L25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72231L25PFI8 Overview
The TQFP package contains FIFO memory chip.There is a case Tape & Reel in which it is packaged.The recommended mounting way is Surface Mount .High efficiency is possible with a supply voltage of 5V .A total of 32 terminations are contained within FIFO means.In the case of the operation pins, they are 32 pins.FIFO design requires a maximum current of 35mA to operate.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at -40°C degrees Celsius at all times.Its maximum operating temperature of 85°C °C ensures stable operation.It is self-contained in FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.There are a total of 32 pins on this board.When the frequency is set to 40MHz it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 40MHz .It is normal for a component to be equipped with 5V power supplies.
72231L25PFI8 Features
FIFOs category
Frequency at most
72231L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72231L25PFI8 FIFOs Memory applications.
- Computer networks
- Test site
- Magnetic memories
- Multi-stage synchronizer
- Game Controller
- Address mapping
- Microprogramming
- Buses
- Emulators
- Alarm System
