72235LB10J8
| Parameters | |
|---|---|
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
72235LB10J8 Overview
You can find FIFO memory chip in the PLCC package.The recommended mounting method for this FIFO products is Surface Mount .It is possible to achieve high efficiency with a supply voltage of 5V .A total of 68 terminations can be found in FIFO means.As far as the operation pins are concerned, they are 68 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .This part is equipped with an IC of type OTHER FIFO memory.There is a possibility that FIFO can operate at very low supply voltages, such as 4.5V V.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 68 pins on this board.With a frequency of 100MHz , it maintains good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .Normally, the component owns 5V power supplies.
72235LB10J8 Features
FIFOs category
Frequency at most
72235LB10J8 Applications
There are a lot of Integrated Device Technology (IDT) 72235LB10J8 FIFOs Memory applications.
- Analog-to-digital converters
- Video Processing
- Queues for communication systems
- SPI Bus Flash Memory Devices
- A/D output buffers
- General Data Collection Applications at Extreme High-Temperatures
- Portable Information Devices
- Routers
- Product traceability
- Application that requires re-writable nonvolatile parameter memory
