72235LB10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB10PF8 Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in the Surface Mount way is recommended.When the supply voltage is 5V there is the possibility of high efficiency.As a result of this, FIFO means contains 64 terminations.There are 64 pins for operation.FIFO requires a minimum of 60mA current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.Keeping the temperature at 0°C degrees Celsius ensures its reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.This gadget is self-contained in?FIFOs .It has a type OTHER FIFO memory IC.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.It has a total of 64 pins on it.Despite a frequency of 100MHz , it is capable of maintaining good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .A component normally has 5V power supplies attached to it.
72235LB10PF8 Features
FIFOs category
Frequency at most
72235LB10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72235LB10PF8 FIFOs Memory applications.
- Temporary storage elements
- A/D output buffers
- Game Controller
- Emulators
- SPI Bus Flash Memory Device
- Wireless
- GPS Offender Tracking
- Video Processing
- Event Recorder
- TVs
