72235LB15PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 4.5kB |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 18b |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB15PF Overview
You will find FIFO memory chip in the TQFP package.It is possible to store data and applications on the FIFO chips as they have 4.5kB in their memory.The recommended mounting method for this FIFO products is Surface Mount .When the supply voltage is 5V , high efficiency is possible.A total of 64 terminations are contained within FIFO means.There are 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 60mA .A voltage of 5V should be used for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.The memory logic's maximum supply voltage is 5.5V volts.Approximately 64 pins are attached to it.It maintains good accuracy at a 66.7MHz frequency.The memory logic's maximum value is 66.7MHz for regular operation.In normal circumstances, the component has 5V power supplies.FIFO memory chip offers enhanced flexibility due to its use of 1 circuits.
72235LB15PF Features
4.5kB memory size
FIFOs category
Frequency at most
72235LB15PF Applications
There are a lot of Integrated Device Technology (IDT) 72235LB15PF FIFOs Memory applications.
- Temporary storage elements
- Computers
- SPI Bus Flash Memory Device
- Transistors
- Controlled baseline
- Data communications
- MP3 Interface for Automobile
- Notebook
- High-speed graphics pixel buffer
- One assembly
