Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
TQFP |
Number of Pins |
64 |
Packaging |
Tape & Reel |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 |
Number of Terminations |
64 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
HTS Code |
8542.32.00.71 |
Subcategory |
FIFOs |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.8mm |
Frequency |
66.7MHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
64 |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
60mA |
Max Supply Current |
60mA |
Frequency (Max) |
66.7MHz |
Access Time |
10 ns |
Organization |
2KX18 |
Density |
36 kb |
Standby Current-Max |
0.005A |
Parallel/Serial |
PARALLEL |
Sync/Async |
Synchronous |
Word Size |
18b |
Memory IC Type |
OTHER FIFO |
Bus Directional |
Unidirectional |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Output Enable |
YES |
Cycle Time |
15 ns |
Height Seated (Max) |
1.6mm |
Length |
14mm |
Width |
14mm |
Thickness |
1.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
72235LB15PFGI8 Overview
The TQFP package contains FIFO memory chip.There's a Tape & Reel on the package.Surface Mount is recommended as the mounting method.A supply voltage of 5V is capable of producing high efficiency.64 terminations are contained in FIFO means.64 pins are the operation pins.For its operation, 60mA is the maximum current required.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at 85°C degrees Celsius, this FIFO products is able to maintain a stable operation.FIFOs contains this gadget in its entirety.It has a OTHER FIFO memory type IC.FIFO may operate at very low supply voltages, such as 4.5V volts.A maximum voltage of 5.5V volts can be applied to FIFO memory.As a result, it contains a total of 64 pins.A frequency of 66.7MHz is sufficient to maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .Normally, the component owns 5V power supplies.
72235LB15PFGI8 Features
FIFOs category
Frequency at most
72235LB15PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72235LB15PFGI8 FIFOs Memory applications.
- Fabrication Site
- Queues for communication systems
- Network bridges
- General Data Collection Applications at Low-Temperatures
- Controlled baseline
- Extended product life cycle
- Rate buffers
- Data communications
- Address mapping
- Down-Hole Energy Drilling