72235LB15PFI
| Parameters | |
|---|---|
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
72235LB15PFI Overview
You can find FIFO memory chip in package TQFP .It is pointing in the direction of Surface Mount .A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 64 terminations.In the case of the operation pins, they are 64 pins.FIFO design requires 60mA amps of current to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.This gadget is self-contained in?FIFOs .This part has a memory type of OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.There are a total of 64 pins on this board.It maintains good accuracy at a 66.7MHz frequency.66.7MHz is the FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72235LB15PFI Features
FIFOs category
Frequency at most
72235LB15PFI Applications
There are a lot of Integrated Device Technology (IDT) 72235LB15PFI FIFOs Memory applications.
- Test Equipment
- Application that requires re-writable nonvolatile parameter memory
- Controlled baseline
- Cameras
- Battery Charger
- Signal processing
- Address mapping
- Network switching/routing
- Desktop Computers
- Consumer
