72235LB15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB15PFI8 Overview
FIFO memory chip can be found in the TQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.An input voltage of 5V results in high efficiency.As a result of this, FIFO means contains 64 terminations.64 pins are the operation pins.There is a maximum current requirement of 60mA for its operation.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 85°C degrees Celsius assures stable operation.In FIFOs , there is a self-contained gadget.In this part, the memory type is OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.It has a total of 64 pins on it.With a frequency of 66.7MHz , it maintains good accuracy.During regular operation, 66.7MHz is the FIFO memory's maximum value.Normally, the component owns 5V power supplies.
72235LB15PFI8 Features
FIFOs category
Frequency at most
72235LB15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72235LB15PFI8 FIFOs Memory applications.
- One assembly
- Desktop Computers
- TVs
- Data-acquisition systems
- Video
- Computers
- Switches
- Measurement Equipment
- MP3 Interface for Automobile
- Communications
