72235LB25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB25J Overview
PLCC is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.As a result of this, FIFO means contains 68 terminations.These are the 68 pins for operation.There is a maximum current requirement of 60mA for its operation.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 68 pins on this FIFO memory IC.In spite of the frequency 40MHz , it is capable of maintaining a good level of accuracy.During regular operation, 40MHz is the FIFO memory's maximum value.It is normal for a component to be equipped with 5V power supplies.
72235LB25J Features
FIFOs category
Frequency at most
72235LB25J Applications
There are a lot of Integrated Device Technology (IDT) 72235LB25J FIFOs Memory applications.
- Data communications
- Magnetic memories
- Firmware loaders
- Digital buffering
- Code converters
- Communications
- Controlled baseline
- Extended product life cycle
- Computer networks
- Multimedia
