72235LB25JI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Tape & Reel |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 40MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB25JI8 Overview
FIFO memory chip is included in the PLCC package.There's a Tape & Reel on the package.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.A total of 68 terminations can be found in FIFO means.There are 68 pins for operation.FIFO design requires a maximum current of 60mA to operate.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .In this part, the memory type is OTHER FIFO .FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 68 pins on this FIFO memory IC.When the frequency is set to 40MHz , the system can maintain good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.Normally, the component owns 5V power supplies.
72235LB25JI8 Features
FIFOs category
Frequency at most
72235LB25JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72235LB25JI8 FIFOs Memory applications.
- Computer Systems
- Application that requires re-writable nonvolatile parameter memory
- Medical Monitoring Device
- Network switching/routing
- Buses
- Network bridges
- A/D output buffers
- Digital buffering
- Test site
- High-speed graphics pixel buffer
