72235LB25PFI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB25PFI Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is memory IC's recommended mounting method.It is possible to achieve high efficiency with a supply voltage of 5V .A total of 64 terminations can be found in FIFO means.FIFO design has 64 operation pins.In order to operate it, it requires 60mA volts of current.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.85°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 4.5V V, may be required for operation.The memory logic's maximum supply voltage is 5.5V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 40MHz it can maintain good accuracy.The memory logic's maximum value is 40MHz for regular operation.Components normally possess 5V power supplies.
72235LB25PFI Features
FIFOs category
Frequency at most
72235LB25PFI Applications
There are a lot of Integrated Device Technology (IDT) 72235LB25PFI FIFOs Memory applications.
- Video time base correction
- Fabrication Site
- Transistors
- High-speed graphics pixel buffer
- Analog-to-digital converters
- Computers
- Industrial Systems
- Event Recorder
- Networking
- Notebook
