72235LB25TF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 2KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72235LB25TF Overview
TQFP is a package that contains FIFO memory chip.Surface Mount is recommended as the mounting method.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 64 terminations.FIFO design has 64 operation pins.For its operation, 60mA is the maximum current required.A 5V supply voltage will ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 64 pins on this FIFO memory IC.A frequency of 40MHz is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 40MHz .A component normally has 5V power supplies attached to it.
72235LB25TF Features
FIFOs category
Frequency at most
72235LB25TF Applications
There are a lot of Integrated Device Technology (IDT) 72235LB25TF FIFOs Memory applications.
- Cardiac Monitoring Device
- Multi-stage synchronizer
- Controlled baseline
- Character generators
- HDD
- Application that requires re-writable nonvolatile parameter memory
- Microprogramming
- Portable Information Devices
- Communications Systems
- Firmware loaders
