72240L10TPG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 28 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Pin Count | 28 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 40mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX8 |
| Standby Current-Max | 0.005A |
| Memory Density | 32768 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 34.3mm |
| Width | 7.62mm |
| Thickness | 3.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72240L10TPG Overview
The DIP package contains FIFO memory chip.Through Hole is recommended as the mounting method.With a supply voltage of 5V volts, high efficiency is possible.As a result of this, FIFO means contains 28 terminations.FIFO design has 28 operation pins.For its operation, 40mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is OTHER FIFO memory type.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 28 pins on this board.During normal operation, the FIFO memory's maximum value is 100MHz .A component normally has 5V power supplies attached to it.
72240L10TPG Features
FIFOs category
Frequency at most
72240L10TPG Applications
There are a lot of Integrated Device Technology (IDT) 72240L10TPG FIFOs Memory applications.
- One assembly
- Extended product life cycle
- Optical memories
- Application that requires re-writable nonvolatile parameter memory
- Disk Controllers
- Multi-stage synchronizer
- Magnetic memories
- Address mapping
- Measurement Equipment
- Data communications
