72241L10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L10J Overview
You will find FIFO memory chip in the PLCC package.The recommended mounting method for this FIFO products is Surface Mount .A supply voltage of 5V is capable of producing high efficiency.A total of 32 terminations are contained within FIFO means.32 pin is used for operation.In order to operate it, it requires 35mA volts of current.A 5V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.Its maximum operating temperature of 70°C °C ensures stable operation.It is contained within FIFOs .The IC of the part is of the type OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.This FIFO memory IC is equipped with 32 pins in total.When the frequency is set to 100MHz , the system can maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.In normal circumstances, the component has 5V power supplies.
72241L10J Features
FIFOs category
Frequency at most
72241L10J Applications
There are a lot of Integrated Device Technology (IDT) 72241L10J FIFOs Memory applications.
- Queues for communication systems
- PC peripheral
- General Data Collection Applications at Low-Temperatures
- Test site
- Game Consoles
- Multi-stage synchronizer
- Data
- GPS Offender Tracking
- Data-acquisition systems
- Event Recorder
