72241L10JG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72241L10JG8 Overview
PLCC is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 32 terminations.In the case of the operation pins, they are 32 pins.In order to operate it, it requires 35mA volts of current.FIFO is recommended that the supply voltage be set to 5V in order to maximize efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.In FIFOs , this gadget is self-contained.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.A total of 32 pins are present on the FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.It is normal for the component to own 5V power supplies.
72241L10JG8 Features
FIFOs category
Frequency at most
72241L10JG8 Applications
There are a lot of Integrated Device Technology (IDT) 72241L10JG8 FIFOs Memory applications.
- Code converters
- Application that requires re-writable nonvolatile parameter memory
- Extended product life cycle
- Programmable Logic Controller
- PC peripheral
- Wireless
- Look-up Tables
- Tape controllers
- Alarm System
- Multi-stage synchronizer
