72241L10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L10PF Overview
TQFP is the package in which FIFO memory chip is contained.A Surface Mount mounting method is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.FIFO consists of 32 terminations, which indicates that FIFO means is empty.32 pin is used for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 35mA .The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.A maximum supply voltage of 5.5V V can be handled by this FIFO memory chip.A total of 32 pins are present on the FIFO memory IC.With a frequency of 100MHz , it exhibits good accuracy.It is recommended that the FIFO memory's maximum value be set to 100MHz .Normaly, the component is powered by 5V power supplies.
72241L10PF Features
FIFOs category
Frequency at most
72241L10PF Applications
There are a lot of Integrated Device Technology (IDT) 72241L10PF FIFOs Memory applications.
- Optical memories
- SPI Bus Flash Memory Device
- Firmware loaders
- Video time base correction
- Data
- Cardiac Monitoring Device
- Product traceability
- MP3 Interface for Automobile
- Thermal Management for DDR3 Memory Modules
- Portable Information Devices
