72241L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L10PF8 Overview
FIFO memory chip is contained in the TQFP package.The package comes in a case of Tape & Reel .Surface Mount is memory IC's recommended mounting method.When the supply voltage is 5V , high efficiency is possible.FIFO consists of 32 terminations, which indicates that FIFO means is empty.As far as the operation pins are concerned, they are 32 pins.In order to operate it, it requires 35mA volts of current.For FIFO's maximum efficiency, the supply voltage should be set to 5V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .This part has a memory type of OTHER FIFO .FIFO memory chips may be operated at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.With a frequency of 100MHz , it exhibits good accuracy.Regular operation has a FIFO memory's maximum value of 100MHz .It is normal for a component to be equipped with 5V power supplies.
72241L10PF8 Features
FIFOs category
Frequency at most
72241L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72241L10PF8 FIFOs Memory applications.
- Extended product-change notification
- General Data Collection Applications at Low-Temperatures
- Tape controllers
- Data-acquisition systems
- Test site
- Extended product life cycle
- Desktop Computers
- Video Processing
- Product traceability
- Event Recorder
