72241L15J8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L15J8 Overview
The PLCC package contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .An input voltage of 5V results in high efficiency.FIFO consists of 32 terminations, which indicates that FIFO means is empty.There are 32 pins for operation.In order to operate it, it requires 35mA volts of current.A supply voltage of 5V is recommended for FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 4.5V volts.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.It consists of a total of 32 pins.When the frequency is set to 66.7MHz , the system can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .Normally, the component owns 5V power supplies.
72241L15J8 Features
FIFOs category
Frequency at most
72241L15J8 Applications
There are a lot of Integrated Device Technology (IDT) 72241L15J8 FIFOs Memory applications.
- Application that requires re-writable nonvolatile parameter memory
- High-speed disk
- Fabrication Site
- Queues for communication systems
- General Data Collection Applications at Extreme High-Temperatures
- SPI Bus Flash Memory Devices
- Programmable Logic Controller
- Measurement Equipment
- Look-up Tables
- PC peripheral
