72241L15JI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L15JI Overview
This package is included in PLCC .It is pointing in the direction of Surface Mount .When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 32 terminations.The operation pins are 32 pins.FIFO design requires 35mA amps of current to operate.When the supply voltage is set to 5V , the FIFO's maximum efficiency is achieved.For reliability, FIFO works at a minimum temperature of -40°C degrees Celsius.Keeping the operating temperature at 85°C °C allows the FIFO products to operate continuously.It is contained within FIFOs .A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 4.5V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.The FIFO memory IC is equipped with a total of 32 pins.It is capable of maintaining good accuracy with a frequency of 66.7MHz .66.7MHz is the FIFO memory IC's maximum value for regular operation.It is normal for the component to own 5V power supplies.
72241L15JI Features
FIFOs category
Frequency at most
72241L15JI Applications
There are a lot of Integrated Device Technology (IDT) 72241L15JI FIFOs Memory applications.
- A/D output buffers
- Communications
- SPD for DDR3 Memory Modules
- Cameras
- Networking
- Data communications
- Emulators
- Network switching/routing
- Firmware loaders
- Queues for communication systems
