72241L15JI8
| Parameters | |
|---|---|
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height | 2.79mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 36 kb |
72241L15JI8 Overview
FIFO memory chip can be found in the PLCC package.The recommended mounting method for this FIFO products is Surface Mount .With a supply voltage of 5V volts, high efficiency is possible.FIFO means contains 32 terminations.There are 32 pins on the operation pins.FIFO requires a minimum of 35mA current to operate.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of -40°C degrees Celsius.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.ICs of type OTHER FIFO are used in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.A maximum voltage of 5.5V volts can be applied to FIFO memory.The FIFO memory IC is equipped with a total of 32 pins.In the presence of a 66.7MHz frequency, it can maintain good accuracy.Normally, the FIFO memory's maximum value is 66.7MHz .There are normally 5V power supplies attached to the component.
72241L15JI8 Features
FIFOs category
Frequency at most
72241L15JI8 Applications
There are a lot of Integrated Device Technology (IDT) 72241L15JI8 FIFOs Memory applications.
- Down-Hole Energy Drilling
- Network switching/routing
- One assembly
- Industrial Systems
- Communications
- Emulators
- GPS Offender Tracking
- Fabrication Site
- General Data Collection Applications at Low-Temperatures
- HDD
