72241L15PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L15PFI8 Overview
You can find FIFO memory chip in the TQFP package.It comes in a Tape & Reel package.Mounting it in Surface Mount is recommended.If the supply voltage is set to 5V , high efficiency can be achieved.A total of 32 terminations are contained within FIFO means.32 pins are used for operation.There is a maximum current requirement of 35mA for its operation.The supply voltage should be set to 5V in order to achieve FIFO's maximum efficiency.Keeping the temperature at -40°C degrees Celsius ensures its reliability.85°C °C is the memory logic's maximum operating temperature that allows stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO memory type IC is used in the part.In some cases, FIFO operates at a very low supply voltage, such as 4.5V V.The FIFO memory chip is capable of handling maximum supply voltages of 5.5V volts.Approximately 32 pins are attached to it.When the frequency is set to 66.7MHz it can maintain good accuracy.There is 66.7MHz FIFO memory IC's maximum value for regular operation.It is normal for a component to be equipped with 5V power supplies.
72241L15PFI8 Features
FIFOs category
Frequency at most
72241L15PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72241L15PFI8 FIFOs Memory applications.
- Data-acquisition systems
- Optical memories
- Game Consoles
- Down-Hole Energy Drilling
- Communications
- Look-up Tables
- Signal processing
- Microprogramming
- Network switching/routing
- Portable Information Devices
