72241L25J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Memory Size | 4.5kB |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Data Bus Width | 9b |
| Organization | 4KX9 |
| Density | 36 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L25J Overview
You can find FIFO memory chip in package PLCC .There is a memory of 4.5kB available for storing data and applications.Mounting it in Surface Mount is recommended.When the supply voltage is 5V , high efficiency is possible.As a result of this, FIFO means contains 32 terminations.FIFO design has 32 operation pins.For its operation, 35mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 5V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.It is self-contained in FIFOs .In this part, the memory type is OTHER FIFO .Low supply voltages, such as 4.5V V, may be required for operation.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 32 pins on this FIFO memory IC.When the frequency is set to 40MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 40MHz .It is normal for a component to be equipped with 5V power supplies.With 1 circuits, FIFO memory chip offers enhanced flexibility.
72241L25J Features
4.5kB memory size
FIFOs category
Frequency at most
72241L25J Applications
There are a lot of Integrated Device Technology (IDT) 72241L25J FIFOs Memory applications.
- Analog-to-digital converters
- Industrial Systems
- Look-up Tables
- Game Consoles
- Thermal Management for DDR3 Memory Modules
- Network bridges
- Video
- Desktop Computers
- TVs
- Portable Information Devices
