72241L25PFI8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 32 |
| Packaging | Tape & Reel |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Pin Count | 32 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 35mA |
| Max Supply Current | 35mA |
| Frequency (Max) | 40MHz |
| Access Time | 15 ns |
| Organization | 4KX9 |
| Density | 36 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 25 ns |
| Height Seated (Max) | 1.6mm |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72241L25PFI8 Overview
TQFP is a package that contains FIFO memory chip.There's a Tape & Reel on the package.Memory IC's recommended mounted way is Surface Mount .A supply voltage of 5V allows for high efficiency.32 terminations are contained in FIFO means.The operation pins are 32 pins.In order for FIFO design to operate, a maximum current of 35mA is required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of -40°C degrees Celsius should be maintained in order to ensure reliability.By operating at a temperature of 85°C °C, the FIFO products is capable of stable operation.FIFOs contains this gadget in its entirety.The IC of the part is OTHER FIFO memory type.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.The memory logic's maximum supply voltage is 5.5V volts.Approximately 32 pins are attached to it.Despite a frequency of 40MHz , it is capable of maintaining good accuracy.There is 40MHz FIFO memory IC's maximum value for regular operation.It is normal for a component to be equipped with 5V power supplies.
72241L25PFI8 Features
FIFOs category
Frequency at most
72241L25PFI8 Applications
There are a lot of Integrated Device Technology (IDT) 72241L25PFI8 FIFOs Memory applications.
- GPS Offender Tracking
- Portable Information Devices
- Communications
- Application that requires re-writable nonvolatile parameter memory
- Video
- Data communications
- Down-Hole Energy Drilling
- Seismic Data Collection at Extreme Temperatures
- Microprogramming
- General Data Collection Applications at Extreme High-Temperatures
