72245LB10J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB10J Overview
This package is included in PLCC .It is recommended that memory IC be mounted in the Surface Mount direction.Supply voltages of 5V are capable of achieving high efficiency.68 terminations are contained in FIFO means.These are the 68 pins for operation.In order to operate it, it requires 60mA volts of current.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .A OTHER FIFO type memory IC is present in the FIFO memory chip.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.There are a total of 68 pins on this FIFO memory IC.In spite of the frequency 100MHz , it is capable of maintaining a good level of accuracy.For regular operation, the memory logic's maximum value is 100MHz .Normally, the component owns 5V power supplies.
72245LB10J Features
FIFOs category
Frequency at most
72245LB10J Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10J FIFOs Memory applications.
- General Data Collection Applications at Extreme High-Temperatures
- Data communications
- Product traceability
- Digital buffering
- Emulators
- Battery Charger
- IP Radio
- Test site
- Video Processing
- Laser Receiver System
