72245LB10JG
| Parameters | |
|---|---|
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 4.572mm |
| Length | 24mm |
| Width | 24mm |
| Thickness | 3.63mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 68 |
| Packaging | Bulk |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
72245LB10JG Overview
You will find FIFO memory chip in the PLCC package.This FIFO memory chip is packaged as a Bulk .Mounting it Surface Mount is recommended.Supply voltages of 5V are capable of achieving high efficiency.I found that it has 68 terminations in FIFO means.In the case of the operation pins, they are 68 pins.In order for FIFO design to operate, a maximum current of 60mA is required.Set the supply voltage to 5V to ensure FIFO's maximum efficiency.In order to ensure reliability, FIFO is maintained at 0°C degrees Celsius at all times.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.The FIFO memory chip may be operated at very low supply voltages, such as4.5V volts.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 68 pins on this FIFO memory IC.When the frequency is set to 100MHz it can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .Normaly, the component is powered by 5V power supplies.
72245LB10JG Features
FIFOs category
Frequency at most
72245LB10JG Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10JG FIFOs Memory applications.
- High-speed disk
- Video
- Wireless
- Computer networks
- Consumer
- Firmware loaders
- IP Radio
- Telecommunication
- Network switching/routing
- Notebook
