Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
68 |
Packaging |
Tape & Reel |
Published |
2013 |
Part Status |
Active |
Max Operating Temperature |
70°C |
Min Operating Temperature |
0°C |
Frequency |
100MHz |
Operating Supply Voltage |
5V |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Element Configuration |
Dual |
Nominal Supply Current |
60mA |
Max Supply Current |
60mA |
Frequency (Max) |
100MHz |
Access Time |
6.5 ns |
Direction |
Unidirectional |
Density |
72 kb |
Sync/Async |
Synchronous |
Word Size |
18b |
Bus Directional |
Unidirectional |
Retransmit Capability |
No |
FWFT Support |
No |
Programmable Flags Support |
Yes |
Length |
24mm |
Width |
24mm |
Thickness |
3.63mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
72245LB10JG8 Overview
You can find FIFO memory chip in package PLCC .This FIFO memory chip is packaged as a Tape & Reel .Surface Mount is recommended as the mounting method.There are 68 pins for operation.FIFO design requires a maximum current of 60mA to operate.A voltage of 5V should be used for FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.An input voltage of 5.5V V is the maximum that FIFO memory can handle.When the frequency is set to 100MHz it can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 100MHz .
72245LB10JG8 Features
Frequency at most
72245LB10JG8 Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10JG8 FIFOs Memory applications.
- SPI Bus Flash Memory Device
- HDD
- Medical Monitoring Device
- Desktop Computers
- Network bridges
- Network switching/routing
- GPS Offender Tracking
- Rate buffers
- SPD for DDR3 Memory Modules
- Character generators