72245LB10PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 4KX18 |
| Density | 72 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72245LB10PF Overview
You can find FIFO memory chip in package TQFP .Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.FIFO means contains a total of 64 terminations.The operation pins are 64 pins.For its operation, 60mA is the maximum current required.When setting the supply voltage to 5V , you will achieve FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is contained within FIFOs .This part has a memory type of OTHER FIFO .Typically, FIFO would work at 4.5V volts, but it may also work at higher voltages.There is a maximum supply voltage of 5.5V volts that FIFO memory can handle.This FIFO memory IC is equipped with 64 pins in total.When the frequency is set to 100MHz it can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.In normal circumstances, the component has 5V power supplies.
72245LB10PF Features
FIFOs category
Frequency at most
72245LB10PF Applications
There are a lot of Integrated Device Technology (IDT) 72245LB10PF FIFOs Memory applications.
- Test Equipment
- Extended product-change notification
- Alarm System
- Wireless
- Video
- General Data Collection Applications at Low-Temperatures
- Extended product life cycle
- Computer Systems
- A/D output buffers
- One assembly
